Guangdong Wordfik Vacuum Technology Co., Ltd. was established in 2019 in Chashan Town, Dongguan City, Guangdong Province. The company has a registered capital of 5 million yuan. Since its establishment, it has aimed to build a vacuum pump maintenance super factory. It specializes in providing customers with various types of vacuum pump repair, maintenance, testing and debugging, vacuum system design and installation, and vacuum pump rental services. The maintenance plant covers an area of about 3,500 square meters. Dust workshop decoration design, dismantling workshop, assembly workshop, testing workshop, spare parts warehouse, equipment room, technical department, cleaning room, etc.
1) It can handle low viscosity fluids at high pressures.
2) It can dry runs for short periods.
3) This pump develops a good vacuum.
Rotary vane vacuum pump works on a positive-displacement pumping principle. The design consists of a rotor, which is mounted eccentrically inside a cylindrical housing or stator. Blades, mounted inside the rotor, move in and out due to centrifugal force following the internal surface of the housing.
The air is injected into the compressor through a valve, where it is contained between the rotor and the chamber wall, located in a chamber. As the rotor turns, the air becomes compressed, and the volume decreases.
Rotary pumps are commonly used for pumping high viscosity liquids such as oil including in handling lube oil and fuel oil in engine rooms. They are typically classified based on the type of rotating element they utilise.
The noise of the rotary vane vacuum pump usually refers to the noise level measured under the ultimate vacuum when the temperature of the pump is stable.
After the rotary vane vacuum pump has been used for a certain period of time, due to the lack of maintenance work, there will be oily smoke at the exhaust port, and many customers do not know the reason. Hope it helps you.