We Have The Best Solutions for Your Business
Guangdong Wordfik Vacuum Technology Co., Ltd. was established in 2019 in Chashan Town, Dongguan City, Guangdong Province. The company has a registered capital of 5 million yuan. Since its establishment, it has aimed to build a vacuum pump maintenance super factory. It specializes in providing customers with various types of vacuum pump repair, maintenance, testing and debugging, vacuum system design and installation, and vacuum pump rental services. The maintenance plant covers an area of about 3,500 square meters. Dust workshop decoration design, dismantling workshop, assembly workshop, testing workshop, spare parts warehouse, equipment room, technical department, cleaning room, etc.
Components of a vacuum system
A more complete vacuum system consists of the following components:
1. Pumping equipment: such as various vacuum pumps
2. Vacuum valve
3. Connect the pipes
4. Vacuum measuring devices: such as vacuum pressure gauges, various gauges
5. Other components: such as collectors, dust collectors, vacuum relay gauge heads, gas storage tanks, etc.
Vacuum system debugging work
The debugging work of the vacuum system mainly includes the no-load debugging after installation, the debugging of the ultimate vacuum degree of the vacuum system, the total air leakage rate of the system and whether the design requirements can be met during pumping, and whether the vacuum system can meet the requirements in the production process. Debugging of process requirements.
Installation and debugging of vacuum system
The vacuum system should be prepared as follows before installation:
① Parts should be cleaned before installation.
② Check the parts for leaks before installation.
③ Check whether the performance of the vacuum pump valve and other components meets the design requirements.
④ According to the electrical diagram, check whether the circuit is complete, whether the switch points to the position of the open circuit, whether the relevant test instrument is at the zero position, whether the ground wire is grounded, and whether the operation is safe.
Frequently Asked Question
Do you have any question?
A number of processes used in the industry operate at pressures below atmospheric (i.e. under vacuum). The main reason for vacuum processes is the ability to lower operating temperatures, thereby saving fuel and avoiding decomposition of hydrocarbon streams.
Simply put, vacuum pumps are mechanical devices that enable the removal of air and gas molecules from a sealed area to create an area devoid of air and/or gas. Generally, their purpose is to clean and seal. Vacuum pumps come in wet or dry variants depending on the media being pumped through them.
Vacuum Pumps can be used in a wide variety of industries and applications to remove air and gas molecules from a process including the food and beverage industry, semiconductor and electronics industry, pulp and paper, medical, plastics and woodworking to name but a few.
Our updates and blog posts
The use and precautions of vacuum pump oil
In a word, vacuum pump oil is a part of vacuum pump accessories and plays a vital role in the equipment. Certain requirements must be followed when selecting it.
How to reduce noise in the production process of rotary vane vacuum pump
The noise of the rotary vane vacuum pump usually refers to the noise level measured under the ultimate vacuum when the temperature of the pump is stable.
Oil mist is coming from the exhaust port of the vacuum pump! What is the solution?
After the rotary vane vacuum pump has been used for a certain period of time, due to the lack of maintenance work, there will be oily smoke at the exhaust port, and many customers do not know the reason. Hope it helps you.